電話：010-62220424
傳真：010-62220448
郵箱：sunny@lethbr.com
怎么樣設置PPPoE server
設置PPPoE server
建立PPPoE server的最低配置為：
1）定義地址池
2）定義接口偵聽
3）選擇認證模式（本地用戶或RADIUS）
4）如果選擇本地認證模式，定義用戶名/密碼
設置步驟：
定義地址池：
ubnt@rtr1:~$ configure
ubnt@rtr1# edit service pppoe-server
ubnt@rtr1# set client-ip-pool start 100.0.0.10
ubnt@rtr1# set client-ip-pool stop 100.0.0.100
定義接口偵聽：
ubnt@rtr1# set interface eth0
選擇認證模式：
ubnt@rtr1# set authentication mode local
如果選擇本地認證模式，定義用戶名/密碼：
ubnt@rtr1# set authentication local-users username bob password secret
ubnt@rtr1# set authentication local-users username joe password secret2
ubnt@rtr1# commit
Starting pppoe-server: pppoe-server.
ubnt@rtr1# top
ubnt@rtr1# show service pppoe-server
authentication {
local-users {
username bob {
password secret
}
username joe {
password secret2
}
}
mode local
}
client-ip-pool {
start 100.0.0.10
stop 100.0.0.100
}
interface eth0
ubnt@rtr1# save
Saving configuration to '/config/config.boot'...
Done
ubnt@rtr1# exit
Exit
或者可以選擇添加DNS服務器：
ubnt@rtr1:~$ configure
ubnt@rtr1# set service pppoe-server dns-servers server-1 8.8.8.8
ubnt@rtr1# commit
Restarting pppoe-server: pppoe-server.
ubnt@rtr1# save ; exit
Saving configuration to '/config/config.boot'...
Done
exit
ubnt@rtr1:~$
查看是否有連接的PPPoE客戶端：
ubnt@rtr1:~$ show pppoe-server
Active PPPoE server sessions:
User Time Iface Remote IP TX pkt/byte RX pkt/byte
---------- --------- -------- --------------- ------ ------ ------ ------
joe 00h35m02s pppoes0 100.0.0.11 178 14.1K 178 13.3K
bob 00h00m19s pppoes1 100.0.0.12 28 2.3K 29 1.9K
踢掉用戶"joe":
ubnt@rtr1:~$ clear pppoe-server user joe
ubnt@rtr1:~$ show pppoe-server
Active PPPoE server sessions:
User Time Iface Remote IP TX pkt/byte RX pkt/byte
---------- --------- -------- --------------- ------ ------ ------ ------
bob 00h01m02s pppoes1 100.0.0.12 29 2.4K 30 2.0K
配置PPPoE客戶端
在另一臺路由器，我們將配置PPPoE客戶端。對于客戶端，最低配置出口的用戶名和密碼。例如：
ubnt@rtr2:~$ configure
ubnt@rtr2# set interfaces ethernet eth1 pppoe 0 user-id joe
ubnt@rtr2# set interfaces ethernet eth1 pppoe 0 password secret2
ubnt@rtr2# commit
ubnt@rtr2# show interfaces ethernet eth1 pppoe
pppoe 0 {
password secret2
user-id joe
}
ubnt@rtr2# save ; exit
Saving configuration to '/config/config.boot'...
Done
ubnt@rtr2# exit
Exit
為了驗證，我們有一個連接，我們會做“show interfaces”：
ubnt@rtr2:~$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
eth0 - u/D
eth1 - u/u
eth2 - u/D
lo 127.0.0.1/8 u/u
::1/128
pppoe0 100.0.0.10 u/u
我們可以看到pppoe0被分配100.0.0.10。
如果你想從PPPoE服務器斷開連接：
ubnt@rtr2:~$ disconnect interface pppoe0
Bringing interface pppoe0 down...
重新連接：
ubnt@rtr2:~$ connect interface pppoe0
Bringing interface pppoe0 up...
ubnt@rtr2:~$
電話：010-62220424
傳真：010-62220448
郵箱：sales@lethbr.com
服務時間：9:00—18:00
地址：北京市海淀區中關村南大街9號理工科技大廈903室